解決所有網頁被綁架的終極完整法

Posted by Dick on May 26, 2009 in Windows XP

這次的移除法將可解決所有的綁架法!!!
例如: 首頁無法更改 . 首頁被更改設定 . 瀏覽器名稱被修改 . 瀏覽器被自動執行 . 開機被鎖定 .
還有最惡劣的登錄編輯器被停用……等等,以上的問題將可以完全解決!!!
目的為解決最近有許多人被一些低級的網站綁架!!!
再次宣告以上綁架法已經是屬於駭客的行為,請立即停止此卑鄙的手法!!!

007.進入HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Winlogon
然後右邊會有一個數值為” LegalNoticeText ” —>這也是讓你再開機時,出現叫你“確定“的東東!!!
——>你只要把此數值刪除就可以了!!!

03.恭喜你!!! 你已經完全移除那卑鄙網站�**A修改的地方!!! 接著只要“重新開機“即可!!!

P.S 最後告訴你不要再去那個卑鄙的網站了!!!
⊙ 備註: 以上後面的幾個方法找不到的,就是你沒有被綁架那些地方!!! ⊙

3. 解決“首頁無法更改“的問題 :
01.進入HKEY_CURRENT_USER\Software\Policies\Microsoft
然後將Internet Explorer的機碼刪除!!!

4. 解決“瀏覽器被自動開啟並到不知名的網站“的問題 :
01.打開登錄編輯器” Regedit.exe
然後到“編輯“–>”尋找“輸入那一個網站的網址去尋找,接著會發現在” internat.exe “的機碼有那一個更改你網站的網址, 對那一個機碼按右鍵選編輯,出現編輯框後把那網址刪除,然後重新開機即可!!!

5. 解決按滑鼠右鍵會有“奇怪的選項“的問題 :
01.打開登錄編輯器” Regedit.exe
然後到“編輯“–>”尋找“輸入那一個奇怪的選項的字去尋找,接著把找到那奇怪的字的字串刪除,然後重新開機即可
◥ 以下開始是解決的方法!!! ◤ 一共有5種方法,每個方法都有完整說明哦!!!

1. 先解決“登錄編輯器“被停用的問題! 先下載 “恢復登錄編輯器” 的登錄檔!!!
(登錄編輯器被停用的人先下載檔案執行,恢復登錄編輯�**a!!!)

2. 解決“首頁被更改設定” . “瀏覽器名稱被修改” . “開機被鎖定” 的以下方法皆適用於一般網頁被綁架的手法!!!

首先,先要執行“登錄編輯器” Regedit.exe

01.按“開始“->”執行“->然後在“開啟“的空格內輸入“regedit”
接著會跑出“登錄編輯器“.

02.開始準備移除了!!! 一共有7個小步驟哦!!!
每個步驟我都會說明他更改的地方!!!

001.進入HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main
然後右邊會有一個數值為” Start Page ” —>這是在修改你的“首頁”
也就是每次開啟IE瀏覽器所出現的第一個網頁—>你只要在這個“Start Page”的數值上
按滑鼠左鍵兩下然後輸入你想要的網站!!!

002.進入HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main
然後右邊會有一個數值為” Window Title ” —>這是在修改你的“瀏覽器的名稱”
也就是在IE瀏覽器上面右邊的字,原本的名稱是“Microsoft Internet Explorer”
—>你只要在這個“Window Title”的字串值上按滑鼠左鍵兩下
然後輸入你想要的名稱!!! 或者把此數值刪除他就會用原來的名子了!!!
(這是IE 5.0″以後“版本適用)

003.進入HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\WinOldApp
然後右邊會有一個數值為” NoRealMode ” —>你只要把此數值刪除就可以了!!!

004.進入HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\Main
然後右邊會有一個數值為” Window Title ” —>這是在修改你的“瀏覽器的名稱”
也就是在IE瀏覽器上面右邊的字,原本的名稱是“Microsoft Internet Explorer”
—>你只要在這個“Window Title”的數值上按滑鼠左鍵兩下
然後輸入你想要的名稱!!! 或者把此數值刪除他就會用原來的名子了!!!
(這是IE 5.0″之前“版本適用)

005.進入HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
然後右邊會有一個數值為” internat.exe ” —>你只要在這個把此數值的“資料“刪除就可以了!!!

006.進入HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Winlogon
然後右邊會有一個數值為” LegalNoticeCaption ” —>這是讓你再開機時,出現叫你“確定“的東東

How to use Acronis to migrate your system to a machine with dissimilar hardware

Posted by aionman on May 23, 2009 in Others

http://www.acronis.com/r/support/en/kb/502/aur_restore.html

Backup to USB, Create Acronis Bootable Media, Restore with Acronis Universal Restore

Step-by-step instructions on how to:

Back up the whole hard disk drive to an external USB Hard drive;
Create Acronis Bootable Media;
Restore the backup from external USB Hard drive using Acronis Universal Restore.

This document applies to:

Acronis True Image Echo Server for Windows with Acronis Universal Restore
Acronis True Image Echo Enterprise Server with Acronis Universal Restore
Acronis True Image Echo Workstation with Acronis Universal Restore
Acronis True Image for Microsoft Windows Small Business Server with Acronis Universal Restore

(!) Acronis Universal Restore is a separate add-on.

(!) Acronis True Image Home does not support Acronis Universal Restore.

This document contains step-by-step instructions on how to migrate your system to a machine with dissimilar hardware.

The entire migration process described here consists of the following steps:

Backing up your system partition to a USB hard drive;
Creating Acronis Bootable Rescue Media with Acronis Universal Restore;
Restoring the backup to a machine with dissimilar hardware.

Step 1: Backing up your system partition to a USB hard drive

Run Acronis True Image Echo;
In the main window of the program click Backup to start the Create Backup Wizard:
On the welcome screen click Next:
Click My Computer to create a backup of the whole hard disk drive or the system partition, including all the data and partition structure:
On the Partitions Selection screen select the partitions or the whole hard disk drive you want to back up:

(!) If you are not going to back up the whole hard disk drive, make sure you back up the system partition.
On the Source Files Exclusion screen you can exclude files from the backup archive:
On the Backup Archive Location screen select your external USB hard disk drive:
On the Select Backup Mode choose Create a new full backup archive:
On the Choose Backup Options screen select to go with the default options or set the options manually:
On the Archive Comments screen put any information about the backup that you might find useful:
On the final screen check the summary of the planned operation and click Proceed to start the backup:
After you click Proceed the backup process will start:
After the backup process completes successfully you will the notification:

Step 2: Creating Acronis Bootable Rescue Media with Acronis Universal Restore

Please make sure that you have Acronis Universal Restore installed on the same machine with Acronis True Image Echo. If it is installed, in the title of the product you will see Acronis True Image Echo [Edition] with Acronis Universal Restore.

On the right pane of main window of the program click Create Bootable Resue Media:
On the welcome screen of Acronis Media Builder click Next:
On the Rescue Media Contents Selection check Acronis True Image Echo [Edition] with Acronis Universal Restore (full version):
On the Bootable Media Selection screen choose your CD burner and insert a blank CD:

You can also select ISO Image if you wish to burn the ISO to a CD later or use it to boot your Virtual Machine.
On the final screen click Proceed to create Acronis Bootable Rescue CD:

Step 3: Restoring the backup to a machine with dissimilar hardware

Before restoring the backup of your machine to a machine with dissimilar hardware, please make sure you have drivers for the hard disk drive controller or chipset drivers. These drivers are critical for booting the operating system.

You can download the drivers for your motherboard on the Vendor’s web-site. Please note, if you downloaded the drivers in *.exe, *.cab, *.zip format, you should extract them first.

The driver files should have *.inf, *.sys or *.oem extension.

Boot the machine to which you are going to restore the backup from Acronis Bootable Rescue CD. (Remember to set the primary boot device to CD-ROM in BIOS to make the machine boot from the CD).
Once booted, select Recovery:
On the welcome screen of the Restore Data Wizard click Next:
On the Backup Archive Selection screen choose the backup archive with system partition that you intend to recover:
On the Restoration Type Selection screen choose Restore disks or partitions:
On the Partition or Disk to Restore screen select the partitions you want to restore:

The recommendation is to select partition by partition, not the whole disk to recover. In this case you will get the possibility to resize the target partition size. In most cases it is not necessary to restore MBR.
On the Restored Partition Location select the target partition or unallocated space to which the backup will be restored:
On the Restored Partition Type set the type Active for your system partition:

If you do not set the type Active for your system partition, the machine will not boot.
If you selected to restore only one partition instead of the whole hard disk drive, you will see the Restored Partition Size window that will let you set the size for the restored partition:
On the Next Selection screen choose No, I do not if you are not going to restore other partitions at this time:
On the Acronis Universal Restore screen select Use Acronis Universal Restore:
On the Specifying Mass Storage Drivers screen click Add to specify drivers:

The recommendation is to specify the drivers manually. Hardware Vendors usually provide separate drivers for SCSI or RAID controllers. IDE or SATA drivers are usually included into the chipset drivers for the motherboard.

The HDD controller drivers are critical for booting the operating system. Specifying drivers for other devices (video/sound card) is not recommended. Once you restore and boot the system, you can update all other drivers manually in Windows Device Manager (Start -> Run -> devmgmt.msc).
On the Select File screen point to the exact driver file for the HDD controller:
Select the driver that will be used:
On the Restoration Options screen you can check both options: Search removable media for device drivers and Search device drivers in the following locations:

Acronis Universal Restore will search the checked options if some drivers are missing.
In Additional settings you can also check Change SID after the restoration is finished:

If this option is enabled, the SID will be automatically changed after the restore.
On the final screen you can check the summary and click Proceed:
The restore process will start: